{
    "bridge_speed": [
        "25",
        "nil",
        "25",
        "nil",
        "nil"
    ],
    "default_acceleration": [
        "2000",
        "nil",
        "2000",
        "nil",
        "nil"
    ],
    "from": "User",
    "gap_infill_speed": [
        "150",
        "nil",
        "150",
        "nil",
        "nil"
    ],
    "inherits": "0.20mm Standard @BBL H2DP",
    "initial_layer_infill_speed": [
        "100",
        "nil",
        "100",
        "nil",
        "nil"
    ],
    "initial_layer_travel_acceleration": [
        "3000",
        "nil",
        "3000",
        "nil",
        "nil"
    ],
    "inner_wall_speed": [
        "150",
        "nil",
        "150",
        "nil",
        "nil"
    ],
    "internal_solid_infill_speed": [
        "150",
        "nil",
        "150",
        "nil",
        "nil"
    ],
    "name": "3DF PCTG Pro 0.20mm Standard @BBL H2DP",
    "outer_wall_acceleration": [
        "2000",
        "nil",
        "2000",
        "nil",
        "nil"
    ],
    "outer_wall_speed": [
        "100",
        "nil",
        "100",
        "nil",
        "nil"
    ],
    "print_extruder_id": [
        "1",
        "1",
        "2",
        "2",
        "2"
    ],
    "print_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow",
        "Direct Drive Standard",
        "Direct Drive High Flow",
        "Direct Drive TPU High Flow"
    ],
    "print_settings_id": "3DF PCTG Pro 0.20mm Standard @BBL H2DP",
    "process_notes": "4/28/26 @ 4:11pm\n- Created from H2D 0.2mm process profile by John Schneider",
    "sparse_infill_pattern": "cubic",
    "sparse_infill_speed": [
        "200",
        "nil",
        "200",
        "nil",
        "nil"
    ],
    "support_speed": [
        "100",
        "nil",
        "100",
        "nil",
        "nil"
    ],
    "top_surface_acceleration": [
        "1000",
        "nil",
        "1000",
        "nil",
        "nil"
    ],
    "top_surface_speed": [
        "100",
        "nil",
        "100",
        "nil",
        "nil"
    ],
    "travel_acceleration": [
        "5000",
        "nil",
        "5000",
        "nil",
        "nil"
    ],
    "version": "2.6.0.2"
}