{
    "bridge_speed": [
        "40"
    ],
    "default_acceleration": [
        "2000"
    ],
    "from": "User",
    "gap_infill_speed": [
        "150"
    ],
    "inherits": "0.20mm Standard @BBL A1",
    "initial_layer_travel_acceleration": [
        "3000"
    ],
    "name": "3DF PCTG Pro 0.20mm Standard @BBL A1",
    "outer_wall_acceleration": [
        "2000"
    ],
    "outer_wall_speed": [
        "100"
    ],
    "print_extruder_id": [
        "1"
    ],
    "print_extruder_variant": [
        "Direct Drive Standard"
    ],
    "print_settings_id": "3DF PCTG Pro 0.20mm Standard @BBL A1",
    "process_notes": "Updated by John S 11-12-25 @ 8:59am",
    "sparse_infill_pattern": "cubic",
    "top_surface_acceleration": [
        "1000"
    ],
    "top_surface_speed": [
        "100"
    ],
    "travel_acceleration": [
        "5000"
    ],
    "version": "2.3.0.5"
}