{
    "bridge_speed": "25",
    "brim_type": "no_brim",
    "enable_support": "1",
    "from": "User",
    "gap_infill_speed": "150",
    "inherits": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
    "inner_wall_speed": "150",
    "internal_solid_infill_speed": "150",
    "ironing_flow": "25%",
    "ironing_spacing": "0.23",
    "ironing_type": "top",
    "is_custom_defined": "0",
    "name": "0.20 3DF PCTG Pro - HQ @Snapmaker U1 (0.4 nozzle)",
    "notes": "Updated 5/5/26 @ 2:23pm\nSpeeds\n- Outer Wall: 200 -> 100mm/s\n- Inner Wall: 300 -> 150mm/s\n- Sparse infill: 270 -> 150mm/s\n- Internal Solid Infill: 250 -> 150mm/s\n- Top Surface: 200 -> 100mm/s\n- Gap Infill: 250 -> 150mm/s\n- Bridge: 50 -> 25mm/s",
    "outer_wall_speed": "100",
    "print_settings_id": "0.20 3DF PCTG Pro - HQ @Snapmaker U1 (0.4 nozzle)",
    "raft_first_layer_expansion": "1",
    "sparse_infill_pattern": "gyroid",
    "sparse_infill_speed": "150",
    "top_surface_speed": "100",
    "version": "2.2.46.2"
}