{
    "enable_overhang_bridge_fan": [
        "0"
    ],
    "fan_max_speed": [
        "20"
    ],
    "fan_min_speed": [
        "0"
    ],
    "filament_notes": [
        "Updated 3/11/26 @ 7:06pm\n- Don't slow down outer walls - uncheck\n\nUpdated 3/16/26 @ 8:38am\n- Overhang cooling activation threshold: 10% -> 95%\n- Overhang and external bridges fan speed: 90% -> 70%\n\nUpdated 3/16/26 @ 10:54am\n- Max fan speed threshold: 40 -> 30%\n- Overhangs fan speed: 70 -> 50%\n\nUpdated 4/21/26 @ 2:35pm\n- Updated heated bed temps to 80C for smooth plate options\n\nv2 - Updated 5/5/26 for Breakaway Std PLA+ profiles\n- Min fan speed: 5 -> 0%\n- Keep fan always on: checked -> unchecked\n- Force cooling for bridges and overhangs: checked -> unchecked\n\nv3 - Updated 5/6/26 @ 11:04am\n- Max fan speed: 30 -> 20%\n- Min layer time: 12 -> 15s"
    ],
    "filament_settings_id": [
        "3D-Fuel PCTG Pro with PLA+ Breakway Support Interface @Snapmaker U1 (0.4 nozzle)"
    ],
    "from": "User",
    "inherits": "3D-Fuel PCTG Pro @Snapmaker U1 (0.4 nozzle)",
    "is_custom_defined": "0",
    "name": "3D-Fuel PCTG Pro with PLA+ Breakway Support Interface @Snapmaker U1 (0.4 nozzle)",
    "reduce_fan_stop_start_freq": [
        "0"
    ],
    "slow_down_layer_time": [
        "15"
    ],
    "version": "2.2.40.2"
}