{
    "bridge_speed": [
        "40",
        "nil"
    ],
    "default_acceleration": [
        "2000",
        "nil"
    ],
    "from": "User",
    "gap_infill_speed": [
        "150",
        "nil"
    ],
    "inherits": "0.20mm Standard @BBL X1C",
    "initial_layer_infill_speed": [
        "100",
        "nil"
    ],
    "initial_layer_travel_acceleration": [
        "3000",
        "nil"
    ],
    "inner_wall_speed": [
        "250",
        "nil"
    ],
    "internal_solid_infill_speed": [
        "200",
        "nil"
    ],
    "name": "3DF PCTG Pro 0.20mm Standard @BBL X1C",
    "outer_wall_acceleration": [
        "2000",
        "nil"
    ],
    "outer_wall_speed": [
        "100",
        "nil"
    ],
    "print_extruder_id": [
        "1",
        "1"
    ],
    "print_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow"
    ],
    "print_settings_id": "3DF PCTG Pro 0.20mm Standard @BBL X1C",
    "process_notes": "Updated by John Schneider on 1/10/26 @ 5:08pm",
    "sparse_infill_pattern": "cubic",
    "sparse_infill_speed": [
        "250",
        "nil"
    ],
    "top_surface_acceleration": [
        "1000",
        "nil"
    ],
    "top_surface_speed": [
        "100",
        "nil"
    ],
    "travel_acceleration": [
        "5000",
        "nil"
    ],
    "version": "2.3.0.3",
    "xy_hole_compensation": "0.08"
}