{
    "bridge_speed": "30",
    "brim_type": "no_brim",
    "default_acceleration": "5000",
    "from": "User",
    "gap_infill_speed": "150",
    "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle",
    "inner_wall_speed": "150",
    "internal_solid_infill_speed": "150",
    "is_custom_defined": "0",
    "name": "3DF PCTG Pro - 0.20mm Standard @Elegoo CC 0.4 nozzle",
    "notes": "Created by John Schneider 5/3/26 @ 12:08 pm",
    "outer_wall_acceleration": "3000",
    "outer_wall_speed": "100",
    "print_settings_id": "3DF PCTG Pro - 0.20mm Standard @Elegoo CC 0.4 nozzle",
    "reduce_infill_retraction": "0",
    "sparse_infill_pattern": "gyroid",
    "sparse_infill_speed": "150",
    "top_surface_speed": "100",
    "version": "1.5.0.7"
}