{
    "base_id": "GP004",
    "bridge_speed": "25",
    "default_acceleration": "5000",
    "from": "User",
    "gap_infill_speed": "150",
    "inherits": "0.20mm Standard @Creality K2 Plus 0.4 nozzle",
    "initial_layer_acceleration": "1000",
    "initial_layer_infill_speed": "100",
    "inner_wall_acceleration": "3000",
    "inner_wall_speed": "150",
    "internal_solid_infill_speed": "100",
    "is_custom_defined": "0",
    "name": "3DF PCTG Pro 0.20mm Standard @Creality K2 Plus 0.4 nozzle",
    "outer_wall_acceleration": "2000",
    "outer_wall_speed": "100",
    "print_settings_id": "3DF PCTG Pro 0.20mm Standard @Creality K2 Plus 0.4 nozzle",
    "reduce_infill_retraction": "0",
    "sparse_infill_pattern": "gyroid",
    "sparse_infill_speed": "150",
    "top_surface_acceleration": "2000",
    "top_surface_speed": "100",
    "version": "26.3.30.17"
}