{
    "from": "User",
    "gap_infill_speed": [
        "150"
    ],
    "inherits": "0.20mm Standard @XPlus4",
    "inner_wall_speed": [
        "150"
    ],
    "internal_solid_infill_speed": [
        "150"
    ],
    "name": "3DF PCTG Pro - 0.20mm Standard @XPlus4",
    "outer_wall_speed": [
        "100"
    ],
    "print_extruder_id": [
        "1"
    ],
    "print_extruder_variant": [
        "Direct Drive Standard"
    ],
    "print_settings_id": "3DF PCTG Pro - 0.20mm Standard @XPlus4",
    "sparse_infill_pattern": "gyroid",
    "sparse_infill_speed": [
        "150"
    ],
    "top_surface_speed": [
        "100"
    ],
    "version": "2.5.2.50"
}