{
    "enable_overhang_bridge_fan": [
        "0"
    ],
    "filament_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow",
        "Bowden Standard",
        "Bowden High Flow"
    ],
    "filament_notes": "4/23/26 @ 5:25 pm\n- Created Profile and set to typical Pro PCTG settings\n\n4/24/26 @ 12:22 pm\n- Chamber temp: 0 -> 45C\n\n4/24/26 @ 4:34 pm\n- Hotend temp: 260 -> 270C\n\n4/25/26 @ 10:13 am\n- Volumetric max: 10 -> 9mm^3/s\n\n5/1/26 @ 12:47pm\n- Min print speed: 10 -> 15mm/s\n- Cooling overhang threshold: 75 -> 95%\n- Force cooling for overhangs and bridges: off (to provide better bonding between PLA support interface + PCTG bridge",
    "filament_settings_id": [
        "3D-Fuel PCTG Pro + PLA+ Supports @Bambu Lab X2D 0.4 nozzle"
    ],
    "from": "User",
    "inherits": "3D-Fuel PCTG Pro @Bambu Lab X2D 0.4 nozzle",
    "name": "3D-Fuel PCTG Pro + PLA+ Supports @Bambu Lab X2D 0.4 nozzle",
    "version": "2.6.0.2"
}