Downloads
- Technical data sheet (TDS)
- Safety data sheet (SDS)
- RoHS letter of conformity
- Technical library for all 3D-Fuel materials
Our data sheets use the material's earlier name, Pro PLA. It's the same formulation as Tough Pro PLA+.
Key properties
| Property | Value | Method |
|---|---|---|
| Base resin | NatureWorks Ingeo 3D870 | |
| Specific gravity | 1.22 g/cc | ASTM D792 |
| Glass transition temperature | 55–60°C | ASTM D3418 |
| Peak melt temperature | 165–180°C | ASTM D3418 |
| Heat distortion temperature, annealed | 75–85°C at 66 psi (0.45 MPa) | ASTM E2092 |
| Tensile strength (XY) | 40 MPa (5,802 psi) | ASTM D638 |
| Flexural strength (XY) | 73 MPa (10,588 psi) | ASTM D790 |
| Notched Izod impact (XY, annealed) | 233 J/m (4.37 ft-lb/in) | ASTM D256 |
| Diameter tolerance | ±0.02 mm, laser-measured |
Typical properties, not specifications. Mechanical values are from parts printed at 100% infill and annealed at 110°C for 20 minutes unless noted. See the TDS for all values and print orientations.
Tough Pro PLA+ is not certified for food contact.
Comments
0 comments
Please sign in to leave a comment.