PET-CF absorbs very little moisture (under 0.3% in 24 hours), but it still prints best dry.
Drying
Dry at 80°C for 12 hours in a filament dryer or oven.
Storage
PET-CF ships vacuum-sealed. Store open spools in a sealed container with desiccant.
PET-CF absorbs very little moisture (under 0.3% in 24 hours), but it still prints best dry.
Dry at 80°C for 12 hours in a filament dryer or oven.
PET-CF ships vacuum-sealed. Store open spools in a sealed container with desiccant.
Comments
0 comments
Please sign in to leave a comment.