Download the current documents here:
The TDS print-settings section predates today's high-speed printers. For current settings, use Settings for printers without a profile.
Material
- 100% virgin NatureWorks Ingeo 4043D PLA resin, with no fillers or stretchers.
- Glass transition temperature: 55–60°C.
- Diameter tolerance: ±0.02 mm, measured with a multi-axis laser system in real time.
- Made in our own facility in Fargo, North Dakota.
Typical mechanical properties (3D printed specimens)
| Property | Test | Value |
|---|---|---|
| Maximum tensile strength | ASTM D638 | 41 MPa |
| Tensile strength at yield | ASTM D638 | 37 MPa |
| Tensile modulus | ASTM D638 | 3.2 GPa |
| Tensile elongation | ASTM D638 | 1.8% |
| Notched Izod impact | ASTM D256 | 26 J/m |
All specimens were 3D printed, so they represent real printed parts more closely than molded test bars.
Comments
0 comments
Please sign in to leave a comment.